Hazardous Area Lighting - Emergency Endurance LED Luminaire

If you have a hazardous or explosion proof area to light, McGeoch now has the perfect solution. What’s more, where there is an existing conventional light fitting, McGeoch’s new Endurance Luminaire provides an easily-fitted direct replacement, its innovative and modular design guaranteeing a long, maintenance-free service life. McGeoch Endurance is ideal for potentially explosive and other hostile or hazardous environments, especially where flammable gases may be present. Based on the same design of the 30W and 55W version, the Emergency Endurance LED Luminaire incorporates a battery which provides a luminous autonomy against failure of electrical service. Main characteristics In emergency mode 3 LEDs will remain illuminated for a minimum of 3 hours (equivalent to 12W) The system is designed to charge the batteries in 24 hours after which the charge rate drops to a maintained rate. Battery charge status is indicated by 3 green LEDs A red fault LED illuminates should the battery or charger fail. Key features of the 30W & 55W Version include ...   Ingress protection IP68 (IP66 with breather drain fitted) Salt Spray - Lloyds Register of Shipping Specification 1 2002, Salt Mist Vibration - Lloyds Register of Shipping Specification 1 2002, Test 1 Storage temperature -20° to 60°C Area classification Zone 1 and Zone 21 to EN 60079-0:2009 (Dust Group 111C), EN 60079-5:2007, EN 60079-7:2007, EN 60079-18:2009 and EN 60079-31:2009 ATEX classification Group 11 Category 2 GD Type of protection Ex em b (increased safety and encapsulation) and Exq Temperature class T5 (100°C) -20°C/+45°C - T4 (135°C) -20°C/+60°C Lens: Lexan polycarbonate UV and impact resistant Chassis: Marine grade aluminium casting hard anodised Stainless steel bezel Dimensions: 670mm x 202mm x 98mm Weight: 9.6kg Entry cable: supplied with flying leads or approved terminal box Control Gear: constant current voltage limited supply Voltage: 110V DC +/-10% and 110-254V AC (47-63Hz) CE and WEEE marked Approvals ATEX approved - SIRA Certificate Number: SIRA 12ATEX3257 IECEx Certificate of Conformity Number: IECEx SIR12.0110 Factory sealed Optical Properties Luminous flux = 2500 lm Colour temperature: 6500K (options available) CRI: 70 (options available) Luminance (Cd/m²) 11,100